Filter
Top Products
47
Features and Controls
Hand Brake
The hand brake operates the front brakes. The hand
brake is located on the right handlebar.
These brakes
are hydraulically activated disc type brakes.
Squeeze
the brake lever toward the handlebar to engage the
front brakes.
Always test brake lever travel and master cylinder
fluid level before riding. When squeezed, the lever
should feel firm. Any sponginess would indicate a
possible fluid leak or low master cylinder fluid level,
which must be corrected before riding. Contact your
dealer for proper diagnosis and repairs.
WARNING! Operating the ATV with a spongy brake lever can result in loss of braking, which could
cause an accident. Never operate the ATV with a spongy-feeling brake lever. Always contact your
dealer for service before operating the vehicle.
Hand Brake
(Front Brake)