Filter
Top Products
97
MAINTENANCE
Extended Storage
Electrical Connections
Separate electrical connector blocks and c lean corrosive build-up from
connectors. Lubricate or pack connector blocks with dielectric grease
and re-connect. See page 99 for the part numbers of Polaris products.
Replace worn or frayed e lectrical wire and c onnectors. Be sure wiring
harness is properly secured away from sharp edges, steering linkage,
moving parts, and hot exhaust parts.
Track and Suspension
Moderate track tension should be
maintained during summer storage.
The machine should be supported off
the ground to allow the track to hang
freely.