Polaris 419C Automobile User Manual


 
102
MAINTENANCE
Fuse Replacement
NOTICE: Always turn off the main disconnect switch
before servicing or unplugging any electrical
components. See page 52.
If you experience electrical failures not related to
the batteries, a fuse may need replacement. Locate
and correct any short circuits that may have caused
the blown fuse, then replace the fuse. See your
authorized GEM dealer if you suspect a relay or
diode needs replacement.
The fuse block is located inside the fuse access panel on the lower console. To open the
access panel, insert the ignition key in the lock and turn it counter-clockwise 1/4 turn.
Fuse Block
Access Panel