Filter
Top Products
Pairing
Your new sensors must be paired with the
receiving device in order to receive data. For
more information, see the user guidance
material of the receiving device or mobile
application.
To ensure a good connection between the
sensors and the receiving device, it is
recommended to keep the device in a bike
mount on the handlebar.
Care and Maintenance
Keep the sensors clean. Clean them with a mild soap
and water solution, and rinse off with clean water. Dry
carefully with a soft towel. Never use alcohol or any
abrasive material, such as steel wool or cleaning
chemicals. Do not immerse the sensors in water.
Your safety is important to us. Make sure that you can
turn your handlebars normally and that the cable wires
for brakes or gears do not catch the bike mount or
sensors. Also, make sure that sensors do not disturb
pedaling or using the brakes or gears. While riding your
bike, keep your eyes on the road to prevent possible
accidents and injury. Avoid hard hits as these may
damage the sensors.
Replacement magnet sets can be purchased separately.
ENGLISH 7