Filter
Top Products
35
1. Prepare required tools.
• Phillips head screwdriver
• New bulb: Pioneer CEL1735-A, 12V 5W (T10, 12V 5W)
2. Remove the screw.
First remove the screw, then the cover followed
by the reflector.
3. Remove the bulb by pulling directly out.
Applying too much force may break the bulb
resulting in injury, so do not use pliers or other
tools.
4. Insert the new bulb into the socket, push-
ing directly in.
5. Replace the reflector and cover and
secure firmly with the screw.
Replace the cover with the hooked side facing the
main unit.
Installation