13
Chapter 1 How to Use Navigation Unit and Names of the Parts
Turning the Unit On and Select-
ing a Source
• If the program is not installed, see Opera-
tion Manual and install the program.
1 Turn the ignition switch (ACC) ON.
The Navigation System’s power supply comes
on.
2 Press SRC button to select a source.
Press SRC button repeatedly to switch
between the following sources:
“XM” (XM tuner) — “SIRIUS” (SIRIUS tuner)
—“RADIO” (tuner) — “TV” (television) —
“AV” (video input) — “S-DVD” (DVD player/
multi-DVD player) — “CD” [CD, MP3/WMA/
WAV](built-in CD drive) — “M-CD” (multi-CD
player) — “EXT-1” (external unit 1) — “EXT-
2” (external unit 2) — “AUX” (Auxiliary equip-
ment)
❒ Press and hold to turn the source off.
❒ In the following cases, the sound source can-
not be used
— When a unit corresponding to each source
is not connected to this unit.
— When no disc is set in the CD loading slot.
— When no disc is set in the DVD-player (“S-
DVD”).
— When no magazine is set in the multi-CD
player.
— When no magazine is set in the multi-DVD
player.
— When the “AUX” (auxiliary input) is set to
off (refer to Operation Manual).
— When the “AV INPUT” (video input) is not
set to “VIDEO” (refer to Operation Manual).
❒ External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
❒ When this unit’s blue lead is connected to the
vehicle’s auto-antenna relay control terminal
with the “AUTO ANTENNA” is set to
“SOURCE”, the vehicle’s antenna extends
while this unit’s source is turned on. To
retract the antenna, turn the source off.
➲ “AUTO ANTENNA” ➞ Operation Manual
Adjusting the Volume
• Use VOL (+/–) to adjust the audio sound
level.
With this product, press VOL (+/–) to
increase or decrease the volume.
❒ To adjust the navigation volume, go to the
navigation menu.
➲ Navigation volume adjustment ➞ Opera-
tion Manual
Turning the Source Off
• Press SRC button and hold until the
source turns off.
❒ This product can be switched off by turn-
ing the ACC (ignition) OFF.