Filter
Top Products
4
2.1 By serial cable
Before you begin:
• Download the upgrade you wish to install.
• Connect your computer to your carkit via the serial cable.
•
Keep the MK6000 off.
1. Start the Parrot Software Update Tool and click Next.
2. Choose the Parrot MK6000 and click Next.
3. Get the previously downloaded files by clicking on Browse and click Next.
4. Select Serial connection and click Next.
5. Select the COM port on which you have connected the serial cable and click Next.
6. Wait until the end of the upgrade process and click on Finish.
► You can now disconnect your car kit from the computer.
► Your Parrot MK6000 is now up-to-date.
Wait for the automatic reboot of the kit.
Do not stop the power source!
This operation can take few minutes.