Filter
Top Products
10
5. Wait until the connection is established then click Finish.
6. An outgoing COM Port is provided by the Bluetooth software during the connection. In our
example the outgoing COM Port is number 46.
Write this number down, it will be required in the Parrot Flash Update Wizard.
However depending on the specificity of your Bluetooth interface it might be
slightly different (refer to your Bluetooth equipment user manual for further
explanations).
7. Start Parrot Software Update Tool and click Next.
8. Select the Parrot MK6000 and click Next.
9. Get the previously downloaded files by clicking on Browse and click Next.
10. Select Bluetooth virtual serial connexion and click Next.
11.
Select the right COM port, which has been previously assigned (COM40 in our example)
and click Next.