Filter
Top Products
6
PAIRING WITH YOUR MOBILE PHONE:
Using for the first time
The first time that you switch on the 3200 LS-Color, you must pair your
mobile phone with the kit.
. Enable the Bluetooth mode on your phone.
. On the hands-free kit, scroll through the menus until you come to Settings
Pair with phone…, and select the relevant option for your phone. A 4-digit
PIN code then appears on screen. Memorise it.
. Search for any peripherals: for further information on this procedure,
refer to the Bluetooth chapter in your mobile phone's user guide or
check out our website at :
www.parrot.biz/guide_chm/3200LS COLOR/index.html
. Once the search has finished, "Parrot 3200LS / Parrot 3400LS" is dis
played on your phone.
. Select the kit. Your phone prompts you to enter a code: key in the code
shown on the kit screen and confirm on your phone.
. The kit's screen displays "Pairing".
. Once the data has been exchanged, "pairing successful" appears on
the 3200 LS-Color.
. The 3200 LS-Color then connects to your phone. Once the connection
has been made, the Bluetooth logo is displayed on the screen (except for
certain phones using the Headset profile).
. Some phones offer additional features, such as displaying your phone's
name on the kit's screen, as well as the battery and signal levels and
the operator's name.
You can now access the menus and their name is announced by the hands-
free kit when you turn the scroll wheel. Press the green button (or the scroll
wheel) to access the menus, and press the red button to exit them.
You can now use your hands-free kit to make and receive calls.
. Receiving a call: press the green button to answer the call.
. Ending a call: press the red button.
. Redial function: hold down the green key on the kit for two seconds
to redial the last number dialled.
. Adjusting the volume: turn the scroll wheel during a call to adjust
the volume.
Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 6