Filter
Top Products
3
07-23-09
SWI-PS
SWI-PS
Programming the SWI-PS to Work With the Vehicle
Step 6.
Press and hold programming/
mode button on SWI-PS. Turn the
vehicle ignition to the ON position.
The LED on the
SWI-PS will light.
Step 7.
Release the programming/
mode button.
The LED will turn off,
indicating memory is
cleared.
Step 8.
Press and release the program-
ming/mode button the same
number of times as the desired
version number.
The LED will ash
each time the button is
pressed and released.
Step 9.
After 3 seconds, the
LED will ash the same
amount of times of set
version number.
Step 10.
Turn vehicle ignition
to OFF position.
Vehicle programming
sequence is complete.
SWI-PS
OFF
ACC
IGN
STRT
OFF
ACC
IGN
STRT
SWI-PS
SWI-PS
SWI-PS
Step 5.
Refer to The Vehicle Appication Guide. Note the INTERFACE Version Number next to the selected vehicle. Fill in the information
below for quick reference.
Version Number: ____________
(Write Version Number here)
SWI-PS