16
On this UI, use stylus to tap at the center of the cross, then tap on other crosses which will
move after each tapping until finish.
Update Logo
The function is for updating start-up logo of the device. Please be sure that you have
stored the Logo pictures into the TF card. After entering into this UI you will see the
interface shown below :
If there is no logo file in the current TF card, please copy the logo file into it or change
another TF card having upgrade file, then click
icon, you may see this upgrade file.
During upgrade operation, click
icon, then a dialogue frame will pop up, shown as
the illustration below:
Then click
icon to cancel upgrade, or click icon to proceed with the upgrade
processing.
Warning: please be sure that the battery is being full when you are updating. Otherwise,
please charge the device fully.