5
1.6 Bottom components
Installing the T-flash Memory Card
To use the product as a media player or navigate in a country outside North America, install
T-flash memory card (2GB micro SD card), blank or loaded with map, into the slot on the right.
NOTE: The card is not included in the standard accessory kit.
Once the card is inserted, it can not be removed during the process of the device operation.
If you need to remove the card, please switch off the unit first. And then push the card in and
it will eject from the slot.
2. Accessory Operations
2.1 Charging by Car Charger
When use your PND in the car, it is better to use the car charger to power the unit, especially
on long journey.
Please plug the car charger into the device’s USB port on its right-side panel.
Please plug the another side of the car charger to cigarette lighter to charge the device.
It is better to fix the power cable so that it will not cause some unnecessary troubles.
2.2 Install the Cradle and Car Mount
Install car Mount System