Filter
Top Products
6
Install PND into the holder
2.3 USB Cable usage
The USB cable is provided for system upgrading. It can connect the navigator to the computer and
make these two synchronize.
For upgrading and more information about Microsoft Active Sync, please visit Microsoft web.
2.4 GPS Initial Cold Start Up
The first starting up should be in an open area without obstructions.
Hold until the device receives 4 GPS satellite signals, then you can program your trip.
Note:
There are various ways for searching a location on the map or planning your routing. Please
follow Navigation User Manual which will guide you when driving.
Step1: Rotate
screw to lock
onto car
glass
Step2: Install the holder
into the Car cradle by
the sockets to lock onto
car glass
Use the two screws
to adjust the angle
and direction of
the PND