Filter
Top Products
EN
10
ZONE
WET
COM
TEMPERATURE HUMIDITY
Any
>70%
20-25°C
(68-77°F)
40-70%
DRY
Any
<40%
This information is shown in the Humidity Area
when the current measurement is displayed.
HEAT INDEX
The Heat Index advises 4 levels of warning if the
temperature is high.
NOTE
DANGER
CATEGORY
TEMPERATURE
°C
°F
>54.5 >130
40.5-54.4
105-130
Extreme danger
Danger
32.2-40.5 90-105Extreme Caution
26.6-32.2 80-90Caution
To display the Heat Index:
1. Press SELECT to navigate to the Temperature Area.
will show next to the Area.
2. Press MODE to reach the Heat Index display.
3. Press CHANNEL to select the desired channel.
If the temperature is below 26°C / 80°F, or the
desired channel is not working, the Heat Index will
display "NA".
TALKING CLOCK
Your clock can keep you informed of the time,
temperature, humidity and weather forecast by the press
of a button or at pre-set times.
To use any talking function, the AC adaptor must
be connected.
NOTE
NOTE
NOTE
ENABLE / DISABLE TALK FUNCTION
To enable or disable the talk function:
• Plug or unplug the adaptor.
OR
• Press and hold UP and DOWN for 3 seconds.
will appear in the bottom, right-hand corner of the
LCD display when the talk function is enabled.
If you are using the adaptor and want to turn
the talk function OFF, then press and hold UP and
DOWN for 3 seconds.
USING THE TALK FUNCTION
To instantly hear the current time, indoor temperature,
humidity and weather forecast, press and hold
SNOOZE / LIGHT for 3 seconds.
To hear the time, temperature, humidity and weather
forecast every hour for a set period of time i.e. 6pm to
10pm, or once every 24 hours:
1. Press SELECT to navigate to the Clock / Alarm Area.
2. Press and hold MODE for 2 seconds.
3. Press MODE to scroll through until you reach the
talk setting, (it appears immediately after display
language).
4. Select 1hr or 24hr broadcast, talk start-time, talk stop-
time and talk volume.
5. Press UP or DOWN to change the setting.
6. Press MODE to confirm.
If you select the 24-hour talk function, you do
not need to enter a talk stop-time.
TALK VOLUME
The talk function icon appears in the bottom, right-hand
corner of the LCD display.
NOTE
ICON VOLUME LEVEL
Low
Medium
High
See "Using the Talk Function" section for how to adjust
the volume.
MESSAGE DISPLAY
Your clock can display messages and warnings in
5 languages. If a warning is being issued
will
flash.
To display messages:
Press MESSAGE, the display box text will flash for
5 seconds and then the message will scroll across the
display.
TEMPERATURE AND HUMIDITY TREND
The trend lines are shown next to the temperature and
humidity readings.
TREND
TEMPERATURE
HUMIDITY
RISING STEADY FALLING
COMFORT ZONE
The Comfort Zone indicates how comfortable the
climate is, based on current temperature and humidity
measurements.
BAR933HG Eng R7 OP 8/20/04, 11:03 PM10
Black