Filter
Top Products
7
EN
GETTING STARTED
BATTERIES
Batteries for the remote and main units are supplied
with this product. Press the RESET button whenever
you change batteries.
Insert the batteries in the remote unit before
you set up the main unit. Do not use rechargeable
batteries.
AC ADAPTOR (main unit)
When the main unit is plugged into the power socket
or batteries are inserted for the first time, an opening
animation will be shown before the MAIN menu
screen.
NOTE
Connect the AC adaptor to your
weather station’s AC socket located
on the side of the main unit.
Batteries are for memory backup purposes
only; the AC adaptor should power the main unit.
NOTE
REMOTE UNIT SET UP
Up to 5 remote units can be used with this product to
monitor outdoor temperature and humidity. The remote
unit included in this package is used to receive radio
frequency signals for the radio-controlled clock, and to
measure temperature and humidity. The measurement
unit (°C or °F) and channel number (1, 2, 3, 4, or 5)
switches are located in the battery compartment of the
remote unit, and should be set prior to installation.
Additional remote units that measure
temperature and humidity are sold separately. If you
are using more than one remote unit, be sure to select
a different channel number for each unit.
The following remote units are compatible with this
product:
• THGR228N
• THGR238N
• THR228N
• THGR328N
NOTE
AWS888N_En_R2 8/16/04, 4:28 PM7