Omron NSH5 GPS Receiver User Manual


 
4
5
With version 2 PTs (V2 suffix in model number), hardware functions are upgraded.
Device operations
Displaying device error locations
Displaying countermeasures
Internal device monitoring
and resetting
NS Series
Previous
(Supporting recovery methods)
NS: Device Navigator
PT
Personal computer tool
PTs as a Machine Navigator
NS-series PTs navigate all areas of machine operation,
from daily operation to error recovery.
PTs as a Machine Navigator
NS-series PTs navigate all areas of machine operation,
from daily operation to error recovery.
The PT is traditionally a
terminal that exchanges data in
allocated areas with the PLC's CPU
Unit. The internal and external control
of a PLC with only this type of data
exchange is, however, difficult.
A NS-series PT, however, uses
communications functions and Smart
Active Parts to incorporate
software computer functions to
operate as a Device Navigator.
Don't you have these problems?
Previous
Colors and
sizes can be
changed.
Only with NS!
Just
attach to
a screen.
Personal computer tools
Previously
a CX-Programmer
was required.
Ensures easy
screen settings
in the NCF.
Previously
a DeviceNet
Configurator was
required.
ThermoTool was
required in the
past.
With an NS-series PT, just drag and drop Smart Active Parts to customize the interface
for your machine.
Wouldn't it be simpler to use the PT instead?
OMRON
ORIGINAL
NS Series
PLC System Objects
DeviceNet Objects
Position Control Objects
Temperature Controller Parts
NS-series PTs provide Smart Active Parts that allow direct data access
to a variety of devices.
Devices accessed without a program.
Example: RS-232C
Example: Ethernet
Example: DeviceNet
Using all of the device-specific
personal computer tools at startup is
okay, but using the personal
computer tools for error recovery
during operation is overly difficult.
Various device-specific tools
Peripheral Devices for PLC
Network control
Temperature settings and
monitoring tools
Setting tool for position control
Smart Active Parts
The Smart Active Parts are the solution.
Refer to page 15 of this catalog to see the wide variety of Smart
Active Parts.
The Smart Active Parts are accessed by selecting
Tools
Use Library
from the menu bar of the CX-Designer.
Increased VisibilityLarge Capacity
Note: The NS5-V1 has a capacity of 6 MB.
NS8-V2/NS10-V2/NS12-V2: 60 MB
(-V1: 20 MB, same as before)
NS5-V2: 20 MB
NS8-V2: Increased from 8.0 to 8.4 inches
NS5-V2(STN)/NS12: Wider field of vision