Omron NSH5 GPS Receiver User Manual


 
22 23
Specifications PLC model nameModel number
CPM1-10CDR/20CDR- /CPM1A-10CD/20CD/30CD/40CD -
CPM2A-30CD/40CD/60CD -
CPM2C-10/20 -
C200HE-CPU32(-Z)(See note.)/CPU42(-Z)
C200HG-CPU33(-Z)(See note.)/CPU43(-Z)/CPU53(-Z)(See note.)/CPU63(-Z)
C200HX-CPU34(-Z)(See note.)/CPU44(-Z)/CPU54(-Z)(See note.)/CPU64(-Z)/CPU65-Z/CPU85-Z
CS1G-CPU42
(-V1)
/CPU43
(-V1)
/CPU44
(-V1)
/CPU45
(-V1)
CS1H-CPU63(-V1)/CPU64(-V1)/CPU65(-V1)/CPU66(-V1)/CPU67(-V1)
CV500-CPU01-V1/CV1000-CPU01-V1/CV2000-CPU01-V1/
CVM1-CPU01-V2/CPU11-V2/CPU21-V2
C Series: CPM1RS-232C or RS-422A adapter connected to peripheral port
RS-232C connector (9-pin)
RS-232C connector (9-pin)
C Series: CPM2A
C Series: CPM2C
CQM1-CPU21/CPU41-V1/CPU42-V1/CPU43-V1/CPU44-V1
CQM1H-CPU11/CPU21/CPU51/CPU61
C200HS-CPU21/CPU23/CPU31/CPU33
C Series: CQM1
C Series: CQM1H
C Series: C200HS
C Series: C200HE (-Z)
C Series: C200HG (-Z)
C Series: C200HX (-Z)
CS Series: CS1G
CS Series: CS1H
CVM1/CV Series:
CV500/1000/2000 or
CVM1
Note: The C200HW-COM02, C200HW-COM04, C200HW-COM05, or C200HW-COM06(-V1) Communications Board is required.
Connections through CPU Unit/Host Link
Standard Models
Communications connectors include both a peripheral port and
RS-232C port (branching possible through CPM2C-CN111
Conversion Cable).
Used as separate peripheral and RS-232C ports through CS1W-
CN114/118 Conversion Cable.
RS-232C connector (9-pin) (Only peripheral port for CQM1H-CPU11)
RS-232C connector (9-pin, selectable)
RS-232C connector (9-pin)
RS-232C connector (9-pin, selectable)
Options
Specifications Model numberModel name
RS-422A
Adapter
Video Input
Unit
Special Cable for the Console
Anti-reflection Sheets
(5 surface sheets)
NS12/10
Protective Covers
(5 pack)
(anti-reflection coating)
Protective Covers
(5 covers included)
(Transparent)
Memory Card
Memory Card Adapter
Battery
Bar Code Reader
(Refer to the Catalog for details.)
NS12/10
30 MB
Inputs: 4 channels
Signal type: NTSC/PAL
Input channels: 2 video
channels and 1 RGB
channel (See note.)
Signal mode: NTSC/PAL
For Controller Link
Communications
NS-CA001
NS-CA002
F150-VKP (2m)
Controller Link
Interface Unit
NS-CLK21
F150-VKP (5m)
NS12-KBA04
NS8 NS7-KBA04
NS5 NT30-KBA04
NS5 NT31C-KBA05
NS12-ATT01B
NS12-ATT02
NS12-KBA05
NS8 NS7-KBA05
NS12/10
NS5 NT31C-KBA05N
NS12-KBA05N
NS8 NS7-KBA05N
NS12-ATT01
NS8-ATT02
NS8-ATT01
HMC-EF372
64 MB
HMC-EF672
HMC-AP001
CJ1W-BAT01
V520-RH21-6
Note: One screen cannot display two video inputs simultaneously.
Transmission distance:
500 m total length
Note: Use this model when
connecting PT models without a V
suffix.
Note: PT models with a suffix of V
can also be connected.
NS-AL002
CJ1W-CIF11
Attachment
Transmission distance:
50 m total length
Note: Only PT models with a suffix
of V are connectable. Use the
NS-002 to connect models without
a V suffix.
(NT625C/631/631C Series to NS12/10 Series)
(NT625C/631/631C Series to NS12/NS10 Series) (Black)
(NT610C Series to NS12/10 Series)
(NT620S/620C/600S Series to NS8 Series)
(NT600M/600G/610G/612G Series to NS8 Series)
Sheet/Cover
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
CU, CE
Case color
Ethernet
Model number
Standards
Model
name
Specifications
NS12
12-inch TFT
800 x 600 dots
No
Yes
Ivory
Black
Ivory
Black
NS10
10-inch TFT
640 x 480 dots
No
Yes
Ivory
Black
Ivory
Black
NS8
8-inch TFT
640 x 480 dots
NS5
NS5
Hand-held
5-inch STN
320 x 240 dots
5-inch TFT
320 x 240 dots
5-inch
monochrome
320 x 240 dots
5-inch STN
320 x 240 dots
No
Yes
No
Yes
Ivory
Black
Ivory
Black
Ivory
Black
Ivory
Black
NS12-TS00-V2
NS10-TV00-V2
NS10-TV00B-V2
NS10-TV01-V2
NS10-TV01B-V2
NS8-TV00-V2
NS8-TV00B-V2
NS8-TV01-V2
NS8-TV01B-V2
NS5-SQ00-V2
NS5-SQ01B-V2
NS5-SQ01-V2
NS5-SQ00B-V2
NS12-TS00B-V2
NS12-TS01-V2
NS12-TS01B-V2
No
Yes
Ivory
Black
Ivory
Black
No
No
Yes
Ivory
Black
Black
Ivory
Black
NS5-TQ00-V2
NS5-MQ00-V2
NS5-MQ00B-V2
NS5-MQ01-V2
NS5-MQ01B-V2
NSH5-SQR001B-V2
NS5-TQ00B-V2
NS5-TQ01-V2
NS5-TQ01B-V2
Model numberModel name Specifications
Cable
(See note 1.)
NSH5 Cables
NSH5 Wall-mounting Bracket
PT-to-PLC
Connecting Cable
Screen transfer cable for DOS/V
PT connection: 9 pins
PLC connection: 9 pins
Length: 2 m
Length: 5 m
USB Host Cable, cable length: 5 m
USB Host Cable, cable length: 2 m
XW2Z-S002
XW2Z-200T
XW2Z-500T
NS-US52 (5 m)
NS-US22 (2 m)
CS1W-CIF31
NSH5-422CW-10M
NSH5-232CW-3M
NSH5-232CW-10M
NSH5-ATT02
USB-RS-232C Conversion Cable,
cable length: 0.5 m
RS-422A cable (loose wires)
Cable length: 10 m
CX-One
FA Integrated
Tool Package
Ver. 1.1
The CX-One is an integrated
tool package that provides
programming and monitoring
software for OMRON PLCs and
components. The CX-One runs
on any of the following
operating systems:
Windows 98 SE, Me, NT 4.0
(Service Pack 6a), 2000 (Service
Pack 3 or higher), or XP.
CX-Designer version 1. is
included in the CX-One.
Refer to the CX-One catalog
(R134) for details.
(See note 2.)
OS: Window 98 SE, Me, NT 4.0
(Service Pack 6a),
2000 (Service Pack 3 or
higher), or XP.
The Ladder Monitor Software
is included.
1 license
1 license
CXONE-AL01C-E
3 licenses
CXONE-AL03C-E
10 licenses
CXONE-AL10C-E
30 licenses
CXONE-AL30C-E
50 licenses
CXONE-AL50C-E
NS-CXDC1-V1
The CX-Designer can also be ordered individually using the following model number.
CX-Designer
Ver. 1.
Specifications
Product name Specifications Model number
Face Plate Auto-Builder for NS CSV tag files for LCB/LCU used in Face Plate Auto-Builder for NS WS02-NSFC1-EV2
WS02-NSFC1-EV2 Face Plate
Auto-Builder for NS
NS Series
SYSMAC CS1 +LCB/LCU
CX-Process Tool
(LCB/LCU programming software)
LCB/LCU program creation
(function block method)
CSV tag file output
CX-Designer
(NS screen creation software)
Editing created data
Creation of other required screens
Face Plate
Auto-Builder for NS
CSV tag file for
LCB/LCU
NS project file
Significantly reduces the engineering time required by
combining LCB/LCU and the NS Series.
Related Products
Automatic generation of control screens and tuning screens. Automatic
generation of NS screen data by the software from tag information created with
CX-Process Tool.
NS communications address allocation, ladder programs, etc., are completely
unnecessary.
Data that has been generated can be freely edited and processed by
CX-Designer (NS screen creation software).
NS Faceplate Auto-Builder upgraded to version 2.0.
Maximum number of automatically generated loops
increased from 32 to 100.
Automatic generation from the CX-Process projects
that use multiple nodes.
Automatic generation of detailed setting screens for
Line Segment programs.
Created screens are
easily transferred to the
NS by means of a
Memory Card or over
the network.
Superior environmental resistance
meets IP65F standards.
Flush surface construction is used for superior
environmental resistance and the enclosure rating for
the front of the PT is IP65F compliant.
IP International Protection
6 Dust and dirt will not enter interior.
(Enclosure protects against foreign objects.)
5 There are no adverse effects from a water stream
from any direction.
(Enclosure protects against water intrusion.)
F There are no harmful effects from oil droplets or
spray from any direction. (Enclosure protects
against oil intrusion.)
Note: May not be applicable in environments with long-term exposure to water or oil.
The PTs conform to UL standards (cULus) and EC
Directives.
In addition, there are no export restrictions on the PTs.
cULus certification is scheduled for the near future for
the NSH5 5-inch Hand-held PT.
Meets International Standards and
Exports are Not Restricted
RS-232C cable (loose wires)
Cable length: 3 m
RS-232C cable (loose wires)
Cable length: 10 m
Note 1: Use an OMRON USB Host Cable to connect an NS-series PT to a printer.
2: Site licenses are also available for users that need to use the CX-One on many computers.
Ask your OMRON representative for details.
CE,
CU
(approval
pending)