Filter
Top Products
a vacuum between the suction cup
and the windshield. Check that the
suction cup is firmly attached.
To detach the mounting device
from the windshield, carefully push
the locking lever toward the top of
the mounting device (3), and pull
the strap located on the edge of
the suction cup (4).
Set to the desired position
Do not adjust the mounting device
while driving.
To set the top of the mounting
device to the desired position,
loosen the two screws in the
middle of the mounting device,
turn the top to the desired
position, and tighten the screws
(5). Ensure that the top of the
device is firmly locked into place.
To set the mounting plate at the
top of the mounting device to the
desired position, loosen the screw
below the plate, turn the plate to
the desired position, and tighten
the screw (6).
Mount the mobile holder
To attach a compatible Nokia
mobile holder to the mounting
plate, use the screw supplied with
the holder.
For example, to use the mobile
holder CR-39, remove the
protection plate with the Nokia
text from the holder, attach the