Filter
Top Products
Check that the deployment of the
airbag is not blocked or impaired in
any way.
Ensure that the mounting device or
mobile holder is not installed
where you might come in contact
with it in the event of an accident
or collision.
Periodically check that the suction
cup at the bottom of the mounting
device is firmly attached to the
windshield, especially if the
ambient temperature changes a
lot.
Never leave the mounting device
inside the vehicle in direct sunlight
or in excessive heat. The mounting
device and suction cup may be
damaged and adhesion may be
impaired if the inside temperature
exceeds +70°C (160°F).
Attach to a windshield
Locate a safe mounting surface on
the windshield, and clean the
surface thoroughly with a glass
cleaner and a clean towel. If the
ambient temperature is below
+15°C (60°F), carefully warm the
surface and the suction cup with a
hair dryer to ensure a firm grip on
the windshield. Ensure that you do
not heat the windshield excessively
to avoid damage to it.
Press the suction cup at the
bottom of the mounting device
firmly on the windshield (see step
1 at the start of this guide), and
carefully push the locking lever
inside the mounting device (2)
towards the suction cup to create