Filter
Top Products
Black plate (359,1)
Model "Z34-D" EDITED: 2009/ 9/ 10
SDI2359
REPLACING
Replace the wiper blades if they are worn.
1. Lift the wiper arm away from the windshield.
2. Push the release tab
*
A
, and then move the
wiper blade down the wiper arm
*
1
while
pushing the release tab to remove.
3. Insert the new wiper blade onto the wiper
arm until a click sounds.
4. Rotate the wiper blade so the dimple is in
the groove.
CAUTION
. After wiper blade replacement, re-
turn the wiper arm to its original
position;
otherwise it may be damaged when
the hood is opened.
. Make sure the wiper blades contact
the glass; otherwise the arm may be
damaged from wind pressure.
SDI2362
Be careful not to clog the washer nozzle
*
A
.
This may cause improper windshield washer
operation. If the nozzle is clogged, remove any
objects with a needle or small pin
*
B
.Be
careful not to damage the nozzle.
Maintenance and do-it-yourself 8-19