Nissan 2010 Z Coupe Automobile User Manual


 
Black plate (174,1)
Model "Z34-D" EDITED: 2009/ 9/ 10
For U.S.: 60 to 908F (16 to 328C)
For Canada: 64 to 908F (18 to 328C)
. The temperature of the passenger compart-
ment will be maintained automatically. Air
flow distribution and fan speed will also be
controlled automatically.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the air is
cooled rapidly. This does not indicate a mal-
function.
Heating (A/C OFF):
The air conditioner does not activate in this
mode. When you need to heat only, use this
mode.
1. Push the “AUTO” button on.
2. Push the “A/C” button. (The A/C indicator
will turn off.)
3. Turn the temperature control dial to set the
desired temperature.
. The temperature of the passenger compart-
ment will be maintained automatically. Air
flow distribution and fan speed are also
controlled automatically.
. Do not set the temperature lower than the
outside air temperature. Otherwise the
system may not work properly.
. Not recommended if windows fog up.
Dehumidified defrosting or defogging:
1. Push the
front defroster button. (The
indicator light on the button will come on.)
2. Turn the temperature control dial to set the
desired temperature.
. To quickly remove ice from the outside of the
windows, turn the
fan speed control
dial and set it to the maximum position.
. As soon as possible after the windshield is
clean, push the “AUTO” button to return to
the auto mode.
. When the
front defroster button is
pushed, the air conditioner will automatically
be turned on at outside temperatures above
238F(58C) to defog the windshield, and
the air recirculate mode will automatically be
turned off.
Outside air is drawn into the passenger
compartment to improve the defog ging
performance.
Manual operation
Fan speed control:
Turn the
fan speed control dial to
manually control the fan speed.
Push the “AUTO” button to return to automatic
control of the fan speed.
Air recirculation:
Push the
intake air control button to
recirculate interior air inside the vehicle. The
indicator light
will come on.
The air recirculation mode cannot be activated
when the air conditioner is in the front defrosting
mode
”.
Outside air circulation:
Push the
intake air control button to
change the air circulation from the intake air to
the outside air. The indicator light “
” will turn
off.
Automatic air intake control:
In the AUTO mode, the intake air will be
controlled automatically. To manually c ontrol
the intake air, push the
intake air control
button. To return to the automatic control mode,
push the
intake air control button for
approximately 2 seconds. The indicator lights
will flash twice, and then the intake air will be
controlled automatically.
Air flow control:
Pushing the “MODE” manual air flow control
button selects the air outlet to:
4-22 Center display, heater, air conditioner, audio, phone and voice recognition systems