Nissan 2010 Z34-D Automobile User Manual


 
Black plate (104,1)
Model "Z34-D" EDITED: 2009/ 9/ 10
. While the door is open, the window cannot
be raised.
If the windows do not close automatically
If the power window automatic function (closing
only) does not operate properly, perform the
following procedure to initialize the power
window system.
1. Push the ignition switch to the ON position.
2. Close the door.
3. Open the window completely by operating
the power window switch.
4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.
5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.
6. Perform steps 2 through 5 above for other
windows.
If the power window automatic function does
not operate properly after performing the pro-
cedure above, have your vehicle checked by a
NISSAN dealer.
SIC4238
MAP LIGHTS
Push the button as illustrated to turn the light on
or off.
SIC4239
INTERIOR LIGHT CONTROL SWITCH
The interior light cont rol switc h has three
positions: ON, DOOR and OFF.
ON position
When the switch is in the ON position
*
1
the
map lights will illuminate.
DOOR position
When the switch is in the DOOR position
*
2
,
the map lights will illuminate under the following
conditions:
. ignition switch is switched to the OFF or
LOCK position
remain on for about 15 seconds.
INTERIOR LIGHTS
2-44 Instruments and controls