Filter
Top Products
1-13
W300
NAVMAN
W300 – Setup
4.1.3 Set button beep status
Set beep ON or beep OFF. When beep is ON, an audible ‘beep’
will sound when buttons are pressed.
Access this option
If necessary, press and hold
to turn the power on and enter
setup. Press
repeatedly until the screen appears as shown
above.
To set button beep status
1) Press
to start editing (setting status flashes).
2) Press
or
to select On or OFF.
3) Press
to stop editing.
4) Press
to go to the next option, or hold
to leave setup.
4.1.4 Set weight units
Set the weight units (kg or lb) for entering user weight value.
Access this option
If necessary, press and hold
to turn the power on and enter
setup. Press
repeatedly until the screen appears as shown
above.
To set weight units
1) Press
to start editing (weight units flash).
2) Press
or
to select kg or lb.
3) Press
to stop editing.
4) Press
to go to the next option, or hold
to leave setup.
status
weight units
SYSTEM
SET
SYSTEM
SET
kg