Navman LA000268 GPS Receiver User Manual


 
LA000605D © 2007 Navman New Zealand. All rights reserved. Proprietary information and specications subject to change without notice.
13
3.0 Packaging and delivery
Jupiter 32 modules are shipped in Tape and Reel form. The reeled modules are shipped with
250 units per reel. Each reel is ‘dry’ packaged and vacuum sealed in an Moisture Barrier Bag
(MBB) with two silica gel packs and placed in a carton.
All packaging is ESD protective lined. The Jupiter 32 GPS receiver is a Moisture Sensitive
Device (MSD) level 3. Please follow the MSD and ESD handling instructions on the labels of the
MBB and exterior carton. See Figures 3-1, 3-2 and 3-3.
CAUTION
This bag contains
MOISTURE SENSITIVE DEVICES
1. Calculated shelf life in sealed bag: 12 months at < 40
o
C and 90%
relative humidity (RH).
2. Peak package body temperature:
o
C,
If blank see adjacent bar code label
3. After bag is opened, devices that will be subject to reow solder or
other high temperature process must be:
a) mounted within hours, at factory conditions
If blank see adjacent bar code label
≤ 30
o
C/60% RH, or
b) stored at ≤ 10% RH.
4. Devices require baking before mounting if:
a) humidity indicator card is > 10% when read at 23±5
o
C,
b) condition 3a or 3b not met.
5. If baking is required, devices may be baked for 48 hours at 125±5
o
C.
Note: If device containers cannot be subjected to high temperature or
shorter bake times are desired,
reference: IPC/JEDEC J-STD-033 for bake procedure.
Bag seal date
o
C,
If blank see adjacent bar code label
Note: Level and body temperature dened by IPC/JEDEC J-STD-020
Figure 3-1: Moisture Barrier Bag Label
240
48
330.0
100 -0+2
All dimensions in mm
Figure 3-2: Reel dimensions