Filter
Top Products
00-02-0605 - 12 - Rev 09-10-08
Setting Up the Display
The screen may be configured to display a single engine
parameter (1-up display), or four parameters at once (4-up
display). Default options are provided or you may customize
the display by selecting the parameters you want.
1-Up Display
Three options are available for modification of the 1-Up
display.
Use Defaults – This option contains a set of engine
parameters: Engine Hours, Engine RPM, System Voltage,
Battery Voltage, % Engine Load at Current RPM, Coolant
Temperature, and Oil Pressure.
Custom Setup – This option allows for the modification of
which parameter, the number of parameters, and the order
in which the parameters are being displayed.
Automatic Scan – Selecting the scan function will cause
the 1-Up Display to scroll through the selected set of
parameters one at a time, momentarily pausing at each.