Moxa Technologies E1 Automobile Accessories User Manual


  Open as PDF
of 4
 
4
Serial-to-Ethernet Solutions
© Moxa Inc. All Rights Reserved. Updated Aug. 14, 2009. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.
Specifications
Ordering Information
Package Checklist (modules)
MiiNePort E1 Series module•
Package Checklist (starter kits)
MiiNePort E1 module •
MiiNePort E1-ST evaluation board•
Universal power adaptor•
2 power cords•
Null modem cable•
Cross-over Ethernet cable•
Document and Software CD•
Quick Installation Guide•
Warranty Card•
Available Modules
MiiNePort E1: Embedded device server for TTL devices, drop-in module, 10/100M with
RJ45 connector, 0 to 55°C operating temperature
MiiNePort E1-T: Embedded device server for TTL devices, drop-in module, 10/100M
with RJ45 connector, -40 to 85°C operating temperature
Available Starter Kits
MiiNePort E1-ST: Starter kit for the MiiNePort E1 Series, module included
MiiNePort E1-ST (w/o module): Starter kit for the MiiNePort E1 Series, module not
included
Form Factor
Type: Drop-in module
Dimensions: 33.9 x 16.25 x 13.5 mm (13.35 x 6.4 x 5.31 in)
Weight: 9 g
System Information
CPU: 32-bit ARM 7 Core
RAM: 4 MB built in
Flash: 2 MB built in
Ethernet Interface
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: RJ45 (with magnetics)
Magnetic Isolation Protection: 1.5 KV built-in
LEDs: 10BASE-T & 100BASE-TX Link Activity, Fault/In-Use
Serial Interface
Number of Ports: 1
Transmission Format: Standard TTL
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF
Baudrate: 50 bps to 230.4 Kbps* (supports non-standard
baudrates)
* Baudrates up to 921.6 Kbps available by request
Serial Signals
TTL: TxD, RxD, RTS, CTS, RST (reset circuit), GND
Digital I/O Pins
GPIO: 3 programmable I/O pins (1 DO, 1 DI, 1 DI/O)
Software
Network Protocols: ICMP, ARP, IP, TCP, UDP, DHCP, HTTP, SNMP
V1/V2c, SMTP, TFTP, Auto IP, Telnet, BOOTP
Configuration Options: Web Console, Serial Console (Serial
Command Mode), Telnet Console, Windows Utility
Windows Real COM Drivers: Windows 95, 98, ME, NT, 2000, XP
x86/x64, 2003 x86/x64, Vista x86/x64, 2008 x86/x64, Embedded CE
5.0/6.0, XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, SVR
4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x
Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x
Operation Modes: TCP Server, TCP Client, UDP, Real COM mode,
Modem Mode, RFC2217
Environmental Limits
Operating Temperature:
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Operating Humidity: 5 to 95% RH
Storage Temperature: -40 to 85°C (-40 to 185°F)
Power Requirements
Input Voltage: 3.3 VDC (±5%)
Power Consumption: 160 mA @ 3.3 VDC max.
Regulatory Approvals
EMC:
•Radiated&conductedemissions:ComplieswithClassBlimitsof
EN55022:1998
•Direct&IndirectESD:ComplieswithEN55024:1998
•ElectricalFastTransient/BurstImmunity:Complieswith
EN55024:1998
•PowerFrequencyMagneticFieldImmunity:Complieswith
EN55024:1998
Shock: 500 g’s for non-operational shock
Vibration: 20 g’s for non-operational vibration
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
 previous