Filter
Top Products
3
99-9107B
KIT ASSEMBLY
Slide the head unit into the radio
opening until the slide clips
engage. (Figure B)
2
Mount the ISO Brackets to the
head unit with the screws sup-
plied with the unit. (Figure A)
1
Snap the pocket into the Radio
Housing. (Figure C)
4
Snap the ISO Trim Plate into the
Radio Housing. (Figure B)
3
Snap the radio assembly into the
factory radio opening.
6
Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-con-
nect the negative battery terminal
and test the unit for proper opera-
tion.
5
ISO DIN HEAD UNIT PROVISION
A
B
C
NOTE: Once the dash kit is snapped
in, it cannot be removed without
dash panel removal