Filter
Top Products
2
99-9107B
KIT ASSEMBLY
Snap the pocket into the Radio
Housing until secure.
(Figure C)
5
Snap
the DIN cage into the Radio
Housing and secure by bending
the metal locking tabs down.
(Figure A)
1
Slide the aftermarket radio into the
cage and secure.
(Figure B)
4
Snap radio assembly into factory
radio opening.
3
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
2
DIN HEAD UNIT PROVISION WITH POCKET
A
B
C
NOTE: Once the dash kit is snapped
in, it cannot be removed without
dash panel removal