Filter
Top Products
99-7504 KIT ASSEMBLY
4
A
B
ISO DIN MOUNT RADIO PROVISION
Mount the ISO Brackets to the after-
market radio using the screws sup-
plied with the radio.
(Figure A)
1
Slide the radio into the radio housing
until it snaps into place.
(Figure B)
2
Attach the trim plate supplied with
the kit to the front of the radio hous-
ing assembly.
(Figure B)
3
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
C
Attach the (2) PC-7503 panel clips to
the rear of the radio housing.
(Figure C)
4