Filter
Top Products
5
TOYOTA 4 RUNNER 2010
ISO DIN HEAD UNIT PROVISION
99-8227S KIT ASSEMBLY
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
Mount the ISO Brackets to the head
unit with the screws supplied with
the unit. (Fig. A)
Snap the pocket into the bottom
opening of the radio housing.
(Fig. B)
Slide the head unit into the radio
opening until the side clips engage.
(Fig. C)
Snap the Trim plate into the Radio
Housing. (Fig. C)
Reassemble dash in reverse order
of disassembly.
1
2
3
4
5
6
A
B
C