Filter
Top Products
4
TOYOTA 4 RUNNER 2010
DIN HEAD UNIT PROVISION
99-8227S KIT ASSEMBLY
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Fig. A)
Snap the pocket into the bottom
opening of the radio housing.
(Fig. B)
Slide the aftermarket head unit into
the cage and secure. (Fig. C)
Reassemble dash in reverse order
of disassembly.
1
2
3
4
5
A
B
C