Filter
Top Products
4
99-5824CH KIT ASSEMBLY
TRANSIT CONNECT 2010-UP
DDIN HEAD UNIT PROVISION
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
Cut and remove the center bar from
the radio housing. (Fig. A)
Snap the Double DIN brackets to the
inside edge of the Radio Housing.
(Fig. B)
Slide the Double DIN head unit
or into the bracket/radio housing
assembly and secure the Double
DIN head unit to the assembly using
the screws supplied with the radio.
(Fig. C)
Mount the radio housing assembly
into the sub dash using the supplied
#8 Phillips screws then clip the radio
housing trim panel onto the radio
housing.
1
2
3
4
5
A
B
C