Filter
Top Products
2
99-5824CH KIT ASSEMBLY
TRANSIT CONNECT 2010-UP
DIN HEAD UNIT PROVISION
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Fig. A)
Snap the pocket into the bottom
opening of the radio housing.
(Fig. B)
Slide the aftermarket head unit into
the cage and secure. (Fig. C)
Mount the radio housing assembly
into the sub dash using the supplied
#8 Phillips screws then clip the radio
housing trim panel onto the radio
housing.
1
2
3
4
5
A
B
C