Filter
Top Products
18
Kit Assembly 95-3302
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Slide the appropriate bracket into the
trim plate aligning the holes in the trim
plate to the clips on the bracket.
(Figure A)
3. Slide the stacked ISO DIN units into the
trim plate bracket assembly and secure
the units to the kit using the screws
supplied with the head units. (Figure B)
4. Aura, Cobalt, G5, HHR, Sky and
Vue only:
Cut and remove top mounting tabs on
each side of the Radio Housing.
(Figure C)
5. Reassemble dash in reverse order
of disassembly.
Stacked ISO mount radio provision
(Figure A)
(Figure B)
(Figure C)