Filter
Top Products
39
Important!
Bring seat backrest to upright position
before recalling a stored seat/head
restraint/steering wheel/exterior and
inside rear view mirror position,
otherwise the front seats could get
forced against a rear seat and be
damaged.
Prior to operating the vehicle, the
driver should adjust the seat height for
proper vision as well as fore/aft
placement and seat back angle to insure
adequate control, reach, operation, and
comfort. The head restraint should also
be adjusted for proper height.
Both the inside and outside rear view
mirrors should be adjusted for adequate
rearward vision.
Fasten seat belts. Infants and small
children should be seated in a properly
secured restraint system that complies
with U.S. Federal Motor Vehicle Safety
Standard 213 and Canadian
Motor Vehicle Safety Standard 213.1.
All seat, head restraint, and rear view
mirror adjustments as well as
fastening of seat belts should be done
before the vehicle is put into motion.
Backrest lock
1 Release button
When a door is open, the backrests can
be folded forward without pushing the
button.
With doors closed and key in steering
lock position 2 the backrests are
locked.
The lock can be released by pushing
button (1).
Entering Rear Passenger
Compartment
With the door open, fold front seat
backrest forward. Automatically the seat
will slide forward and the head restraint
move down.
When folding the seat backrest back,
seat and head restraint return to their
previous positions.
To interrupt the automatic process,
activate the power seat switch.
Warning!
Never place hands under seat or
near any moving parts during the
seat adjustment procedure.