Filter
Top Products
116
Rear Seat Cushion
Removal: Push in locking tabs (1) (on
left and right side of seat) and pull up
seat at the front.
Installation: Slide rear edge of cushion
under the backrest so that both wire
loops under the backrest engage at the
seat cushion. Push front of cushion
down until it locks in place.
Caution!
Watch out for sharp edges when
removing or installing the rear seat
cushion, and make sure that it is
securely locked in place again, to
prevent injury.
Manual Closing of Trunk Lid
The trunk lid can be closed manually
should a malfunction occur on the
power closing system.
With the trunk lid open:
push sliding switch to position (1),
press eye of latch in (2),
push sliding switch to position (3).
Close trunk lid.