Filter
Top Products
122
Testing Infrared Remote Control
Checking Batteries:
If the transmit button (1) is pressed
longer than 1 second, the battery
indicator lamp in the transmitter eye (2)
briefly illuminates -indicating that the
batteries are in order.
Change batteries if the indicator lamp
does not come on.
Changing Batteries:
Slide release (3) laterally and pull off
battery cover (4).
Change batteries
Change batteries, inserting new ones
under contact spring (5) with plus ( + )
side facing up.
Press battery cover onto housing until
locked in place.
Important!
Batteries contain materials that can
harm the environment if disposed of
improperly. Recycling of batteries is
the preferred method of disposal. For
disposal, please follow manufacturer's
recommendation on battery package.
Replacement battery: Lithium,
type CR 2025 or equivalent.
Synchronizing System:
The system may have to be re-
synchronized, if the transmitter is
without voltage for several minutes.
To synchronize system, aim transmitter
eye (2) at inside rear view mirror
receiver and briefly press transmit
button (1) twice. Within approx. 30
seconds, insert key in steering lock and
turn it to position 2.
The infrared remote control should
once again be operational.