Filter
Top Products
110
Turn Signal, Parking, Side Marker
and Standing Lamp
(2357 NA [28.5/8.3 W/30/2.2 cp]
bulb)
Open hood.
Squeeze latch (1) together and lift
complete lamp assembly out to front
of vehicle. Twist bulb socket (2)
counterclockwise and pull out.
Push bulb into socket, turn
counterclockwise and remove.
Insert new bulb in socket, push in and
twist clockwise. Reinstall bulb socket.
Reinstall lamp assembly by sliding
tabs (3) into guides (4) until properly
seated.
1 Latch for turn signal, parking,
side marker and standing lamp
assembly
2 Bulb socket for turn signal, parking,
side marker and standing lamp
3 Tab
4 Guide