Filter
Top Products
Retracting AIRCAP
X
Turn the key to position 2 in the ignition
lock.
X
Open the cover on the lower center
console.
X
Press AIRCAP button :.
The two indicator lamps on the AIRCAP
button go out. Wind deflector ; retracts.
The head restraints on the rear bench seats
and AIRCAP wind screen = move to the
lowest position simultaneously.
i
If there are passengers wearing seat belts
in the rear compartment, the head
restraints on the rear bench seats and the
AIRCAP wind screen remain in the upper
position.
Retracting the head restraints on the
rear bench seats from the driver's seat
To improve the rear view, you can retract the
head restraints on the rear bench seats
individually (Y page 109). The wind deflector
remains in its current position.
Installing and removing the AIRCAP
wind screen
Preparation
You will need a 4 mm Allen key to install/
remove the AIRCAP wind screen.
Before installing or removing the AIRCAP
wind screen:
X
Turn the key to position 2 in the ignition
lock.
X
Open the folding roof fully (Y page 90).
X
Extend the head restraints in the rear
compartment fully (Y page 109).
Removing
Bolts on the AIRCAP wind screen between the head
restraints in the rear compartment
X
Use the 4 mm Allen key to turn the bolts on
both sides counter-clockwise by about 90°
and release them.
X
Pull the bolts out of the brackets on the
head restraints.
X
Pull the AIRCAP wind screen out of the
guide rails in the direction of the arrow.
Make sure that you pull the AIRCAP wind
screen forwards slightly when doing so.
98
Soft top (Cabriolet)
Opening and closing
BA 207 USA, CA Edition B 2011; 1; 3, en-US
d2sboike Version: 3.0.3.6
2010-05-20T10:38:09+02:00 - Seite 98