MAX COOL is only operational when the
engine is running.
When you activate MAX COOL, climate
control switches to the following functions:
R
maximum cooling
R
maximum airflow
R
air-recirculation mode on
X
To activate: press the Ù button.
The indicator lamp in the button lights up.
X
To deactivate: press the Ù button
again.
The indicator lamp goes out. The previously
selected settings come into effect again.
Defrosting the windows
Windows fogged up on the inside
X
Activate the "cooling with air
dehumidification" function ¿.
X
Activate automatic mode Ã.
X
If the windows continue to fog up, activate
the defrosting function (Y page 124).
i
You should only select this setting until
the windshield is clear again.
Windows fogged up on the outside
X
Switch on the windshield wipers.
X
Press the _ button repeatedly until the
O or P symbol appears in the
display.
i
You should only select this setting until
the windshield is clear again.
Rear window heating
Activating/deactivating
G
Warning
Any accumulation of snow and ice should be
removed from the rear window before driving.
Visibility could otherwise be impaired,
endangering you and others.
The rear window heating has a high current
draw. You should therefore switch it off as
soon as the window is clear as it only switches
off automatically after several minutes.
If the battery voltage is too low, the rear
window heating may switch off.
X
Turn the SmartKey to position 2 in the
ignition lock.
X
Press the ¤ button.
The indicator lamp in the ¤ button lights
up or goes out.
Problems with the rear window heating
The rear window heating has deactivated
itself prematurely or cannot be activated.
X
Switch off any consumers that are not
required, e.g. reading lamps or interior
lighting.
When the battery is sufficiently charged,
the rear window heating is activated again
automatically.
Activating/deactivating air-
recirculation mode
You can deactivate the flow of fresh air if
unpleasant odors are entering the vehicle
from outside. The air already inside the
vehicle will then be recirculated.
G
Warning
Fogged windows impair visibility,
endangering you and others. If the windows
begin to fog on the inside, switching off the
air recirculation mode immediately should
clear interior window fogging. If interior
window fogging persists, make sure the air
conditioning is activated, or press the ¬
button.
X
Turn the SmartKey to position 2 in the
ignition lock.
X
To activate: press the g button.
The indicator lamp in the g button lights
up.
Operating the control systems
125
Climate control
BA 204 USA, CA Edition A 2011; 1; 5, en-US
hereepe Version: 3.0.3.6
2010-05-20T09:17:30+02:00 - Seite 125
Z