Filter
Top Products
X
Switch on the ignition.
X
Seat cushion depth: Adjust the seat
cushion depth to the length of your upper
leg using switch ?.
X
Seat backrest contour: Adjust the
contour of the seat backrest to the desired
position using W or X.
X
Move the seat backrest support cushion to
the bottom with button = or to the center
with button ;.
X
Seat backrest side bolsters: Adjust the
side bolsters so that they provide good
lateral support using switch :.
i
If, after a period of time, the seat no longer
provides the desired contour, then repeat
the adjustment procedure.
Seat ventilation
The blue indicator lamps in seat ventilation
switch : come on to show which ventilation
level you have selected.
i
The seat ventilation for the driver’s seat
can be activated using the summer opening
feature (Y page 96).
X
Switch on the ignition.
X
Switching on: Press seat ventilation
switch :.
Three blue indicator lamps in seat
ventilation switch : come on.
X
Press seat ventilation switch : repeatedly
until the desired ventilation level is set.
X
Switching off: Press seat ventilation
switch : repeatedly until all indicator
lamps go out.
If one or more of the indicator lamps in the
seat ventilation switch : are flashing, there
is insufficient voltage available since too
many electrical consumers are turned on. The
seat ventilation switches off automatically.
The seat ventilation will switch back on again
automatically as soon as sufficient voltage is
available.
Seat heating
Front seat heating switches
Seats
81
Controls in detail
219_AKB; 4; 54, en-US
d2ureepe, Version: 2.11.8.1
2009-05-11T16:21:02+02:00 - Seite 81
Z