Mercedes-Benz 2010 CLS-Class Automobile User Manual


 
Display messages
Possible causes/consequences and X Solutions
+
Key Not
Detected
(message
appears in
red)
The SmartKey with KEYLESS-GO is not detected while the
engine
is running because the SmartKey is not in the vehicle.
X
Stop the vehicle as soon as it is safe to do so.
X
Engage the parking brake.
X
Search for the SmartKey.
The vehicle cannot be locked centrally nor can the engine
be started again after the engine is stopped.
+
Key Not
Detected
(message
appears in
red)
The SmartKey with KEYLESS-GO is not detected while the
engine is running because there is strong radio-frequency
interference.
X
Stop the vehicle as soon as it is safe to do so.
X
Engage the parking brake.
X
Operate the vehicle with the SmartKey in the starter switch.
+
Key Not
Detected
(message
appears in
white)
The SmartKey with KEYLESS-GO is momentarily not detected.
X
Change the position of the SmartKey in the vehicle.
X
Operate the vehicle with the SmartKey in the starter switch
if necessary.
~
Bluetooth
Ready
The telephone has not yet been connected to the COMAND
system via Bluetooth
®
.
X
Connect the telephone to the COMAND system via
Bluetooth
®
.
¥
Top Up
Washer
Fluid
The fluid level has dropped to approximately
1
/
3
of total
reservoir capacity.
X
Add washer fluid (Y page 181).
242
Vehicle status messages in the multifunction display
Practical hints
219_AKB; 4; 54, en-US
d2ureepe, Version: 2.11.8.1
2009-05-11T16:21:02+02:00 - Seite 242