Filter
Top Products
The contour of the front seat backrests can
be individually adjusted to provide optimum
support for your back.
X
Switch on the ignition.
X
Upper back support: Use button : to
adjust the upper back support to the
desired position.
X
Lumbar region support: Use button ; to
adjust the lumbar region support to the
desired position.
X
Lateral support: Use button = to adjust
the lateral support to the desired position.
i
If, after a period of time, the seat no longer
provides the desired contour, then repeat
the adjustment procedure.
Rear seat head restraints
G
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint in such a way that it
is as close to the head as possible and the
center of the head restraint supports the back
of the head at eye level. This will reduce the
potential for injury to the head and neck in the
event of an accident or similar situation.
With a rear seat occupied, make sure to move
the respective head restraint up from the
lowest non-use position and have the
occupant adjust the head restraint properly.
Do not drive the vehicle without the seat head
restraints installed when the rear seats are
occupied. Head restraints are intended to
help reduce injuries during an accident.
Rear seat head restraint height
adjustment
X
Raising: Pull head restraint upward to the
desired position.
X
Lowering: Press release button : and
push down on head restraint.
Rear seat head restraint fore and aft
adjustment
X
Adjust the head restraint to the desired
position by pushing or pulling on the lower
edge of the head restraint cushion.
Seats
83
Controls in detail
204_AKB; 5; 23, en-US
d2ureepe, Version: 2.11.8.1
2009-07-16T17:54:06+02:00 - Seite 83
Z