Filter
Top Products
Replacing bulbs
391
X
Gently press the new bulb into bulb socket
7.
X
Place bulb socket 7 back into the housing
and turn it clockwise until it engages.
X
Align housing cover 2 and turn it
clockwise until it engages.
Parking and standing lamp bulb,
front turn signal lamp bulb,
side marker lamp bulb
X
Turn respective bulb socket 3, 4 or 5
(Y page 390) with the bulb
counterclockwise and remove it.
X
Pull the bulb out of the bulb socket.
X
Gently press the new bulb into the bulb
socket.
X
Place bulb socket 3, 4 or 5 back into
the housing and turn it clockwise until it
engages.
Front fog lamp bulb
!
If not done carefully and properly, damage
to the bumper can result. It is
recommended to have this work carried out
at an authorized Mercedes-Benz Center.
Removing front fog lamp cover
1
Cover
2
Front fog lamp or corner-illuminating front
fog lamp
X
Insert a suitable object (e.g. a screwdriver)
at point indicated by the arrow and pry out
cover 1.
Cover 1 is released.
X
Swing cover 1 outwards and take it off.
Accessing and replacing the front fog
lamp bulb
1
Front fog lamp
2
Retaining screws
X
Remove retaining screws 2.
X
Remove front fog lamp 1 from the
bumper.
X
Pull electrical connector off.
Practical hints
Z