Filter
Top Products
Seats
105
of the head restraint supports the back of
the head at eye level. This will reduce the
potential for injury to the head and neck in
the event of an accident or similar situation.
Second-row seat head restraint
1
Head restraint
2
Release button
X
Raising: Manually adjust the height of head
restraint 1 by pulling it upward to the
desired position.
X
Lowering: Push release button 2 and
press down on head restraint 1.
i
The third-row seat head restraints are
adjusted in the same manner.
Head restraint fore and aft adjustment
The angle of the head restraint for the outer
second-row seats or the third-row seats can
be adjusted manually.
X
While seated, reach behind you with both
hands and find lower edge of the head
restraint.
X
Adjust the head restraint to the desired
position by pushing or pulling on the lower
edge of the head restraint cushion.
Head restraints, removing and
installing
G
Warning!
Do not drive the vehicle without the seat
head restraints installed when the rear
seats are occupied. Head restraints are
intended to help reduce injuries during an
accident.
With a rear seat occupied, make sure to
move the respective head restraint up from
the lowest non-use position and have the
occupant adjust the head restraint
properly.
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint in such a way that
it is as close to the head as possible and the
center of the head restraint supports the
back of the head at eye level. This will
reduce the potential for injury to the head
and neck in the event of an accident or
similar situation.
Controls in detail
Z