Filter
Top Products
416
Practical hints
What to do if …
Display symbol Display message Possible cause/consequence Possible solution
•
Coolant
Stop, turn engine off
The poly-V-belt could be broken. ̈ Stop the vehicle in a safe location and im-
mediately turn off the engine.
̈ Check the poly-V-belt.
If it is broken:
̈ Do not continue to drive. Otherwise the en-
gine will overheat due to an inoperative wa-
ter pump which may result in damage to the
engine. Notify an authorized Mercedes-Benz
Center.
If it is intact:
̈ Do not continue to drive the vehicle with
this message displayed. Doing so could re-
sult in serious engine damage that is not
covered by the Mercedes-Benz Limited
Warranty.
̈ Observe the coolant temperature indicator
in the instrument cluster (
୴ page 27).
̈ Drive immediately to the nearest authorized
Mercedes-Benz Center.