Filter
Top Products
108
Controls in detail
Memory function*
Storing positions into memory
̈ Adjust the seat, on the driver’s side
also the steering wheel and exterior
rear view mirrors, to the desired posi-
tions (
୴ page 38).
̈ Press memory button M 1.
̈ Release memory button M 1 and
press a memory position switch 2
within 3 seconds.
All settings are stored to the selected
position.
Recalling positions from memory
̈ Press and hold desired memory posi-
tion switch 2 until the seat, on the
driver’s side also the steering wheel
and exterior rear view mirrors, have
completely moved to the stored posi-
tions.
Storing exterior rear view mirror
parking position (parking aid)
For easier parking, you can adjust the
passenger-side exterior rear view mirror so
that you can see the right rear wheel as
soon as you engage reverse gear R.
You can switch the parking position fea-
ture on and off via the control system
(
୴ page 148).
For information on activating the parking
position feature, see “Activating exterior
rear view mirror parking position*”
(
୴ page 175).
!
Do not operate the power seats using
the memory position switches if the
seat backrest is in an excessively re-
clined position. Doing so could cause
damage to the seats.
i
Releasing the memory position switch-
es immediately stops movement to the
stored positions.