Filter
Top Products
106
Controls in detail
Seats
Red indicator lamps 2 on the AIRSCARF
switches show which heating level you
have selected:
̈ Switch on the ignition (୴ page 36).
Switching on
̈ Press the respective AIRSCARF switch
for the desired side.
All three indicator lamps on the respec-
tive AIRSCARF switch come on. After
a preheating time of approximately
7 seconds, the blower starts.
̈ Press the respective AIRSCARF switch
repeatedly until the desired AIRSCARF
heating level for the corresponding
seat is reached.
Switching off
̈ Press the respective AIRSCARF switch
repeatedly until all indicator lamps on
the AIRSCARF switch go out.
Level
3 Three indicator lamps on
(highest heating level).
2 Two indicator lamps on.
1 One indicator lamp on
(lowest heating level).
off No indicator lamp on.
i
After switching off the AIRSCARF
neck-level heating, the AIRSCARF fan
continues to operate for approximately
10 seconds to cool down the heater
elements.
i
If one or more of indicator lamps 2 on
the AIRSCARF switch are flashing,
there is insufficient voltage available
since too many electrical consumers
are turned on. The AIRSCARF neck-lev-
el heating switches off automatically.
The AIRSCARF neck-level heating will
switch back on again automatically as
soon as sufficient voltage is available.