Filter
Top Products
37
Getting started
Adjusting
Seat cushion tilt
̈ Turn handwheel 2 forward or back-
ward until your upper legs are lightly
supported.
Seat backrest tilt
̈ Switch on the ignition (୴ page 33).
̈ Press switch 3 in direction of arrow
until your arms are slightly angled
when holding the steering wheel.
Seat height
̈ Switch on the ignition (୴ page 33).
̈ Press switch 4 in direction of arrow
until your legs are lightly supported.
Head restraint height
1 Release button
Raising:
̈ Manually adjust the height of the head
restraint by pulling it upward.
Lowering:
̈ To lower head the restraint, push
release button 1 and push down on
the head restraint.
i
Adjust the head restraint in such a way
that it is as close to the head as
possible.
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head re-
straint supports the back of the head at eye
level. This will reduce the potential for injury
to the head and neck in the event of an ac-
cident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.