Filter
Top Products
231
Controls in detail
Audio system
ț Terminating a call
̈ Press t button.
The current call is terminated. You
are again connected with the caller
previously placed on hold.
ț Combining two calls
̈ Press 3 and s buttons.
The calls are combined into one
call.
ț Terminating a combined call
̈ Press t button.
The connection to both callers is
terminated.
TDMA or CDMA network phones
Using your Mercedes-Benz specified
mobile telephone*, a number of functions
and operating steps can be performed and
displayed in the audio system display.
Further operating instructions not covered
here can be found in the operating instruc-
tions for the multifunction steering wheel
and the mobile telephone*.
If your audio system is set up for telephone
operation, the t symbol will appear in
the display.
When you insert your Mercedes-Benz
specified mobile telephone* into the
telephone cradle, you will be prompted to
enter your PIN for 30 seconds
(
୴ page 231). This display disappears
when you press any button.
When your mobile telephone is inserted
into the telephone cradle, you will see the
reception strength in the upper right-hand
corner of the display.
Switching on the telephone
Switching on the telephone
̈ Press h button.
If you have programmed an unlock
code for the telephone, you must now
enter the code.
̈ Enter code using buttons 1
to R.
̈ If necessary, correct number entered
with the
CLR
soft key. Press soft key
briefly to delete the last digit entered;
press soft key and hold to delete the
complete number.
୴୴